Every oil delivery ties your heating bill to a truck schedule and a price you can’t control. Natural gas removes both problems, but only if the switch makes financial sense for your property. National cost data puts most conversions between $6,000 and $20,000, and the oil to gas conversion Long Island cost for your home depends on what’s in your basement and under your street.
This guide breaks down where that money goes, from the new boiler to the old oil tank. You’ll also learn how to confirm gas service with National Grid and when staying with oil is the smarter choice. By the end, you’ll know what a complete estimate should include.
Oil to Gas Conversion Long Island Cost Breakdown
Two questions shape the oil to gas conversion Long Island cost for most homes: does gas already reach your house, and can your existing radiators, baseboards, or ducts stay? According to HomeGuide’s oil-to-gas conversion cost data, a basic conversion with an existing gas line typically runs $6,000 to $12,000, while a project that needs a new gas line usually falls between $12,000 and $20,000.
These are typical U.S. market rates, checked November 2026, not a Long Island quote. Local labour rates, permit fees, and site conditions all move the final number. HomeGuide’s component estimates show where the money usually goes:
- New gas boiler or furnace, installed: $3,500 to $12,000
- Interior gas piping from the meter: usually $350 to $2,000
- Oil tank removal: $400 to $2,800 for aboveground tanks, $800 to $3,400 for underground tanks
- Tank abandonment in place: $600 to $3,400
- Chimney liner, if required: $1,500 to $4,000 or more
- Contamination cleanup, if a tank has leaked: $2,500 to $15,000 or more
1. Boiler or Furnace
Equipment is usually the largest line item. Homes with radiators or baseboard heat need a boiler, while homes with ductwork typically suit a gas furnace. In many hot-water systems, you can keep the existing radiators and thermostats and replace only the oil-fired boiler. A high-efficiency condensing unit costs more upfront but can reduce fuel use compared with an ageing oil system. Reviewing boiler installation options ensures that the models you compare will ultimately help you choose the best one for your needs.
2. Gas Service to Your Street
Your distance from the gas main matters a great deal. National Grid’s Long Island conversion guide says it provides up to 100 feet of service line from the street to the meter at no cost, plus up to 100 feet of main if gas isn’t already in front of your home. Longer runs can add charges, so ask your contractor which utility costs fall on you.
3. Oil Tank Removal or Abandonment
A basement tank is generally easier to remove than a buried one, which may need excavation. Depending on its location and condition, a tank can be removed or abandoned in place with the proper permit. In Nassau County, small heating oil tank closures are scheduled through the county’s hazardous material storage programme, and many villages require their own permit. Confirm whether tank work is included in your quote or handled separately.

4. Gas Piping and Venting
Gas piping must be sized for your new equipment and any other gas appliances. Venting may also change, because many high-efficiency boilers vent through PVC pipe instead of the chimney. Other systems need a chimney liner. Runs through finished walls or ceilings add labour.
5. Permits and Inspections
Gas piping and heating equipment replacement generally require permits and inspections. Your estimate should state which permits and fees are included and who handles the project through final inspection.
Is Converting From Oil to Gas Worth It?
Converting tends to make sense when your oil equipment is near the end of its life, gas is available at your street, and projected fuel costs justify the investment. Switching fuels doesn’t automatically lower your bills, though. Savings depend on fuel prices, equipment efficiency, insulation, and how you heat your home.
The practical benefits include:
- No more oil deliveries: No tank gauges to watch or delivery calls to schedule
- No fuel stored on-site: Once the tank is properly removed or abandoned, it’s gone from your planning
- Newer, more efficient equipment: A modern gas boiler or furnace may use fuel more efficiently than an older oil unit
- Cleaner operation: Gas equipment typically produces less soot, and regular HVAC maintenance helps keep it running efficiently
Staying with oil may be the better choice if your current system is relatively new and reliable, or if bringing gas to your property would require costly utility work. Compare the full conversion cost with your projected annual heating costs before deciding.
How to Check Natural Gas Availability at Your Long Island Home
Gas availability depends on the infrastructure serving your specific address, so a neighbour’s gas service doesn’t guarantee yours. Start with National Grid’s Connect to Natural Gas request form. The utility says it will confirm within one to two business days whether service is available and whether the line meets the distance requirements for your home.
Once availability is confirmed, National Grid requires a signed Non-Fossil Alternatives Acknowledgment form before any work can begin. Before requesting contractor quotes, confirm:
- Whether a gas main serves your street
- Whether utility work or fees beyond the free footage apply
- Whether your meter can handle the new heating equipment and other gas appliances

How to Compare Oil to Gas Conversion Estimates
The lowest quote isn’t always the best value, because incomplete estimates often leave out tank work, venting, or permits. Ask every contractor to itemise:
- Heating equipment: Model, capacity, efficiency rating, and warranty
- Gas connections: Interior piping, meter requirements, and utility coordination
- Oil tank handling: Removal or abandonment, disposal, and permits
- Venting: Chimney liner or alternative exhaust setup
- Additional work: Electrical changes, condensate drainage, and removal of old oil equipment
- Permits and inspections: Fees and who is responsible for approvals
An itemised written estimate makes it easier to compare contractors and avoid surprise costs during installation.
Common Mistakes to Avoid
A fuel conversion involves more than replacing your boiler. Avoid these mistakes when planning the project so you can compare estimates accurately and reduce the risk of unexpected work.
- Assuming gas is available: A nearby property may have service when yours does not. Confirm availability for your exact address with National Grid before committing to a contractor
- Comparing incomplete quotes: An estimate that excludes tank work, venting, or permits can appear cheaper. Request an itemised breakdown from every contractor
- Overlooking the oil tank: Its location and condition can affect the project cost. Arrange an assessment and confirm the required removal or abandonment process
- Choosing equipment by price alone: An undersized or unsuitable system can affect comfort and performance. Ask for equipment recommendations based on your home’s heating requirements

Frequently Asked Questions
How Long Does an Oil-to-Gas Conversion Take?
Most conversions take about two to six weeks from the first consultation to gas activation, according to HomeGuide. The installation itself usually takes one to three days. Utility scheduling, permits, and inspections account for much of the remaining time.
Do You Have to Remove Your Oil Tank When Switching to Gas?
Not necessarily. Some tanks can be legally abandoned in place instead of removed, depending on their location, condition, and local rules. Buried tanks deserve extra attention because a leak can lead to costly cleanup. Have the tank evaluated and confirm that the required county and village notifications are handled.
Can You Install a Gas Conversion Burner Instead of a New Boiler?
Some oil boilers can accept a gas conversion burner, and National Grid lists it as an option to discuss with your plumber. However, an older boiler fitted with a new burner still has its original age and condition. Compare this option with installing a new gas boiler before deciding.
Should You Convert to Gas Before Replacing an Old Oil Boiler?
Yes, it’s worth evaluating first. If your oil boiler is near the end of its life, pricing a gas conversion before buying replacement oil equipment lets you compare both options. That way, you can avoid investing in a new oil system you might want to replace later.
Does Converting Your Heating System Also Convert Your Water Heater and Stove?
No. A heating conversion does not automatically replace or reconnect other appliances. If you want your water heater, stove, or other equipment to use natural gas, those changes need to be included in the project scope. Ask the contractor to check appliance compatibility, gas piping capacity, and the meter requirements.
Get an Accurate Oil to Gas Conversion Long Island Cost for Your Home
The right decision comes down to your equipment’s age, natural gas availability at your address, and a complete, itemized quote. Once you understand these factors, you can determine whether switching fuels makes financial sense for your household and what the long-term benefits may be. Comparing the oil to gas conversion Long Island cost with your current heating expenses can also help you assess the potential savings against the upfront investment.
At All Island Plumbing, Heating & Cooling, we install gas boilers, furnaces, and complete gas heating systems for homeowners across Nassau and Suffolk counties. Our licensed and insured technicians assess your existing setup, explain which upgrades your home may need, and provide upfront pricing before work begins. We can also help you understand the installation process and plan a conversion around your property’s heating requirements.
We can help you understand the work involved and plan a conversion around your home’s heating requirements.


